Prepare RE Digest Samples for Middle Schoolers Dilute M13 Forward Ready Made Primer from IDT company
Start looking at Overlap PCR cloning and start on Leishmania target
070212 - Priya, how did your pmCherry PCR turnout? If good - go onto pLIC PCR and then Overlap PCRs for your target.
062112 - Priya, try to figure out how to embed your images into the page instead of just having it link to the file. Also, add a REALLY good caption. - Thanks, DR. B
07.16.12: Annealing and Transformation
07.13.12: Made accepting vector and PCR inserts
07.11.12: Did PCR cleanup on second PCR^2
07.10.12: Did second PCR^2 and ran on gel
07.09.12: PCR Cleanup on PCR^2
07.06.12: Ran PCR Squared on gel
Lane 1:PCR^2
Lane 2:PCR^2
Lane 3:PCR^2
Lane 4:PCR^2
Lane 7: 1kb DNA marker
07.05.12: PCR Squared
07.04.12: Secondary PCR; ran both primary and secondary on gel Lane 1: Skip Lane 2: 100 bp DNA Ladder Lane 3: 1kb DNA Ladder Lane 4: Primary PCR (PA) Lane 5: Secondary PCR Option B (PA) Lane 6: Skip Lane 7: Primary PCR, old Oligo Mix A (KR) Lane 8: Primary PCR, new Oligo Mix B (KR) Lane 9: Primary PCR, new Oligo Mix C (KR) Lane 10: Skip
07.03.12: Ran pLIC PCR on gel and started overlap PCR (primary PCR)
Lane 2: 100bp DNA marker
Lane 3: Tube A
Lane 4: Tube B
Lane 5: Tube C
Lane 6: Tube D (no DNA control)
07.02.12: Ran pmCherry PCR on gel and did pLIC PCR
Results
06.29.12: Worked on primer design and did pmCherry PCR
06.28.12: Worked on primer design
06.27.12: Worked on primer design
06.26.12: Prepared RE digest for middle schoolers, diluted M13For, Leishmania target
06.25.12: PCR Gel
Lane 4: 100bp DNA ladder
Lane 5: Tube B- 1:1000 template dilution (3ng plasmid)
Lane 6: Tube C- 1:100 template dilution (30 ng plasmid)
Lane 7: Tube A- 1:1000 template dilution (0.3ng plasmid)
Lane 8: Tube D- No DNA control
06.22.12: PCR (PGBR22)
06.21.12: Midi Prep with pmcherry and DH5alpha
Nanodrop:
06.20.12: Beer's Law
06.19.12: PyMOL 1 and RE Digest Redo
Lane 2: 1kb ladder
Lane 4: Uncut DNA
Lane 5: EcoRI
Lane 6: PvuII
Lane 7: EcoRI and PvuII
This gel redo did not turn out as expected either. Some of the DNA got stuck in two of the wells, and there may be some contamination in lane 6.
06.18.12: Transformation Efficiency (pmcherry with DH5alpha)
1ng plasmid- approximately 960 colonies/ng
5ng plasmid- approximately 1008 colonies/ng
25ng plasmid- approximately 1108 colonies/ng
06.14.12, 06.15.12: RE Digest
The bands did not appear as expected; the 4th and 5th lanes are probably contaminated, and the 6th lane does not have the spacing I expected. My virtual (expected) gel is below:
06.12.12: Micropipettor calibration
faizbaqai61212vdspippettingsnip.JPG
06.12.12: Submitting DNA for sequencing; Analysis:
ToDo List:
Prepare RE Digest Samples for Middle SchoolersDilute M13 Forward Ready Made Primer from IDT company
Start looking at Overlap PCR cloning and start on Leishmania target
070212 - Priya, how did your pmCherry PCR turnout? If good - go onto pLIC PCR and then Overlap PCRs for your target.
062112 - Priya, try to figure out how to embed your images into the page instead of just having it link to the file. Also, add a REALLY good caption. - Thanks, DR. B
07.16.12: Annealing and Transformation
07.13.12: Made accepting vector and PCR inserts
07.11.12: Did PCR cleanup on second PCR^2
07.10.12: Did second PCR^2 and ran on gel
07.09.12: PCR Cleanup on PCR^2
07.06.12: Ran PCR Squared on gel
Lane 1:PCR^2
Lane 2:PCR^2
Lane 3:PCR^2
Lane 4:PCR^2
Lane 7: 1kb DNA marker
07.05.12: PCR Squared
07.04.12: Secondary PCR; ran both primary and secondary on gel
Lane 1: Skip
Lane 2: 100 bp DNA Ladder
Lane 3: 1kb DNA Ladder
Lane 4: Primary PCR (PA)
Lane 5: Secondary PCR Option B (PA)
Lane 6: Skip
Lane 7: Primary PCR, old Oligo Mix A (KR)
Lane 8: Primary PCR, new Oligo Mix B (KR)
Lane 9: Primary PCR, new Oligo Mix C (KR)
Lane 10: Skip
07.03.12: Ran pLIC PCR on gel and started overlap PCR (primary PCR)
Lane 2: 100bp DNA marker
Lane 3: Tube A
Lane 4: Tube B
Lane 5: Tube C
Lane 6: Tube D (no DNA control)
07.02.12: Ran pmCherry PCR on gel and did pLIC PCR
Results
06.29.12: Worked on primer design and did pmCherry PCR
06.28.12: Worked on primer design
06.27.12: Worked on primer design
06.26.12: Prepared RE digest for middle schoolers, diluted M13For, Leishmania target
06.25.12: PCR Gel
Lane 4: 100bp DNA ladder
Lane 5: Tube B- 1:1000 template dilution (3ng plasmid)
Lane 6: Tube C- 1:100 template dilution (30 ng plasmid)
Lane 7: Tube A- 1:1000 template dilution (0.3ng plasmid)
Lane 8: Tube D- No DNA control
06.22.12: PCR (PGBR22)
06.21.12: Midi Prep with pmcherry and DH5alpha
Nanodrop:
06.20.12: Beer's Law
06.19.12: PyMOL 1 and RE Digest Redo
Lane 2: 1kb ladder
Lane 4: Uncut DNA
Lane 5: EcoRI
Lane 6: PvuII
Lane 7: EcoRI and PvuII
This gel redo did not turn out as expected either. Some of the DNA got stuck in two of the wells, and there may be some contamination in lane 6.
06.18.12: Transformation Efficiency (pmcherry with DH5alpha)
1ng plasmid- approximately 960 colonies/ng
5ng plasmid- approximately 1008 colonies/ng
25ng plasmid- approximately 1108 colonies/ng
06.14.12, 06.15.12: RE Digest
The bands did not appear as expected; the 4th and 5th lanes are probably contaminated, and the 6th lane does not have the spacing I expected. My virtual (expected) gel is below:
06.12.12: Micropipettor calibration
06.12.12: Submitting DNA for sequencing; Analysis: